10CrMo910

10CrMo910, with increased molybdenum and chromium, provides greater heat and corrosion resistance than 16Mo3 & 13CrMo45. Again the material is a pressure vessel grade steel for use in elevated temperature service. We supplies 10CrMo910 to fabricators serving the oil and gas industry. The steel has good weldability and is offered under the EN 10028 standard.

10crmo910 alloy pipe is used for heating surface pipes of low and medium pressure boilers (working pressure is generally not greater than 5.88Mpa and working temperature below 450 ° C), for high pressure boilers (working pressure is generally above 9.8Mpa and working temperature is 450 – 650° C Between) heating surface pipes, economizers, superheaters, reheaters, pipes for petrochemical industries, etc.

Grade	C	Si	Mn	P	S	Cr	Mo	Ni	N	Cu
10CrMo910	0.08/0.14	0.5	0.40/0.80	0.02	0.01	2.00/2.50	0.90/1.10	–	0.012	0.3

Thickness	Yield Strength	Tensile Strength	Elongation (A)
mm	MPa	MPa	%
≤16	310	480/630	18
>16 ≤40	300	480/630	18
>40 ≤60	290	480/630	18
>60 ≤100	280	470/620	17
>100 ≤150	265	460/610	17
>150 ≤250	250	450/600	17

Thickness	-20°C	0°C	+20°C
mm	J	J	J
≤16	–	–	31
>16 ≤40			31
>40 ≤60			31
>60 ≤100			27
>100 ≤150			27
>150 ≤250			27