Ceramic lined composite pipe tee

The Ceramic Lined Composite Pipe Tee is a kind of wear resistant ceramic pipe. The outside of the it is composed of a steel structure, and the wear-resistant ceramic lining is used as a wear-resistant layer. The middle is connected with wear-resistant ceramic adhesive. It is strong and anti-aging, also not easy to fall off. With wear resistance, corrosion resistance, impact resistance and other properties, its service life is several times than that of ordinary steel. The product can be used in steel, thermal power, lithium battery, cement, coal mine, petrochemical, metallurgical and other industries. Anti-wear for straight pipe, tee, elbow and reducing pipe.

The Ceramic Lined Composite Pipe Tee is a relatively seriously worn part in the piping system. The wear-resistant ceramic tee adopts the method of lining wear-resistant ceramics, which effectively prolongs the service life of it. The main performance of this product is reducing the damage of the pipeline caused by wear and tear. When the pulverized coal pipeline is transported, there will be friction, which will rub the back arc position of the elbow, so that it can withstand strong external friction. The product is very reasonable and correct in structure. Even when some materials with strong abrasive properties are conveyed in the pipeline, this product can still withstand frequent and strong friction, and in this case, its service life is still very long.

Ceramic technical parameters

Content of alumina≥92%≥95%
Density≥3.6 g/cm3>3.8g/cm3
Rockwell A hardness≥82HRA≥85HRA
Impact strength≥1200 MPA≥1500 MPA
Fracture toughness≥3.8MPa·m1/2≥4.0MPa·m1/2
Vickers hardness≥1150HV10≥1200HV10
Bending Strength≥290MPa≥330MPa

Product advantages

TheCeramic Lined Composite Pipe Tee not only has excellent wear resistance, high temperature resistance and impact resistance, but also has good toughness and excellent mechanical and thermal shock resistance. It can resist various corrosive media (acid, alkali, salt) and organic media within a certain temperature and concentration range. It is easy to install, has good performance, and can be welded, flanged, etc. Compared with other pipe tee, it has longer service life and more economical. investment cost. What’s more, our company can produce various types of regular tee, oblique tee, equal diameter tee, reducing tee, etc. according to customer needs.

Factory introduction

The company has strong product development and production capabilities. It has advanced wear resistant ceramic production lines, isostatic pressing, automatic presses, spray drying towers, etc., as well as steel structure production lines, medium frequency hot simmering pipe benders and other large scale equipment, and is equipped with professional Equipment and technical staff.

Application industry

Pipes for iron making and blast furnace coal injection, slag conveying and other pipelines in iron and steel plants, preferred pipelines for conveying ferroalloys in steel making, and refining outside the furnace;

Coal drop pipes in thermal power plants, vertical mill outlet air ducts, coal mill outlet pipes, air duct elbows, high temperature air ducts, dust collection pipes, etc.;

Circulating air ducts, pulverized coal elbows, waste heat power generation air ducts, dust collection pipes, material conveying pipes, etc. in cement plants;

Coal mine industry conveying coal slurry, washing coal slurry, mine filling material, coal powder pipeline, etc.;